Cone crusher is a kind of crushing machinery and equipment commonly used in mine crushing and stone crushing. The correct feeding method will not cause blockage during operation. So what should we do when the cone crusher shows partial blockage of the feedstock?
Because the feed size is not uniform, the transition between the feed hopper and the feed opening forms a right angle, especially when the degree of dryness and wetness of the ore changes, it constitutes a blockage. The correct feeding method and the splitting of the cone crusher Combination of the disc and the feed box will help ensure that the fully mixed material is evenly distributed along the entire crushing cavity. The segregation of fine materials and coarse materials should be kept as small as possible to minimize the wear of the liner. Regardless of the type of cone crusher, if the material condition is not very good, it is recommended to screen before crushing.

A complete sand and gravel production line mainly includes jaw crushers, cone crushers, sand making machines, vibrating screens, feeders, washing equipment, etc. When configuring a complete production line, we must carry out the equipment according to the specific requirements of customers Selection and matching.

As the secondary crushing equipment in the production line, the cone crusher plays an important role in the production line. The cone crusher has great advantages for a variety of hard materials. Cone crusher performance advantages

Jaw crusher, commonly known as jaw crusher, also known as tiger mouth, is an earlier crushing equipment. Because of its simple structure, sturdiness, reliable work, easy maintenance and repair, and relatively low production and construction costs, it is still widely used in mining, smelting, building materials, highways, railways, water conservancy and chemical industries and many other sectors. The compressive strength has not been stained with various materials of 320 MPa. Due to the poor working nature of the jaw crusher, its components are susceptible to wear during production. Let's take a look at the reasons for the wear of the vulnerable parts of the jaw crusher.
 

During the operation of the crusher, some unexpected failures often occur, and the material blocking and tripping is one of them. When the crusher malfunctions, friends should not panic. All you have to do is to find out the cause, cure the "sickness" of the crusher, and prescribe the right medicine.

The crusher "eats too much and can't digest it", and it's not a big problem that jamming stops. That the main reason for the crusher's main machine to stop during crushing and blocking is that too much material accumulates in the small cavity of the crusher and can not be discharged out. It resists the moving cone and causes the motor to overload and stop. There are usually two situations that cause a trip.

Jaw crushers have the advantages of low noise, simple structure, reliable operation, etc., and are widely used, but often due to irregular operation or long-term component wear and other reasons, the discharge is not up to standard. Let's look at it in detail below: