How to solve the dust problem of the jaw crusher

 The jaw crusher is commonly known as smashing. The jaw crusher produced by Jiaozuo Zhongxin mainly consists of steel plate casting and other types. The jaws are composed of two jaws, which are composed of moving jaws and static jaws. The material is squeezed by moving jaws and static jaws. Complete the crushing process of the material. Jaw crusher is widely used in quarries, mine manufacturing, building materials, roads, railways, water conservancy and chemical industry, construction waste treatment, and other industries. The highest compressive strength of crushed materials is 320Mpa. Below Jiaozuo Zhongxin will talk about the solution to the dust problem of the jaw crusher.

 

First, reduce the dust of the jaw crusher
     1. Install a sealing cover at the source of the dust, and configure the water spray and dust suction device at the same time.
    (1) Two water spouts are provided at the inlet and outlet, and the direction of the spout must be reasonable, pointing to the source of the dust.
    (2) A vacuum cleaner is arranged at the inspection port behind the crushing chamber, and the connecting duct between the fan and the fan is made into a flexible pipe, thereby facilitating daily care of the device.
    (3) The water spray device is arranged in the conveyor belt to reduce the dispersion of dust during the conveying process.
Second, optimize the transformation of the tooth plate and other structures of the chute chute.
    (1) Appropriately reduce the inclination angle of the chute chute, thereby reducing the material potential energy difference.
    (2) Increase the number of teeth of the tooth plate in other cases.
    (3) Replace the damaged sieve plate in time to avoid the problem of dust increase caused by material blockage.