How to solve the problem of excessive stone powder in the crushing work of the impact crusher?

The impact crusher is a commonly used equipment for mining machinery crushing. The impact crusher can perform coarse, medium and fine crushing operations on various ores, rocks (such as granite, marble, limestone) with a compressive strength not exceeding 350MPa. It is widely used in the production of sand and gravel for construction in industries such as roads, railways, water conservancy, electricity, and construction.

When the impact crusher is working, in addition to the large amount of airflow brought out by the rotation of the rotor, which makes the stone powder fly out, it also crushes the material mainly through multi-stage crushing and grinding in the crushing chamber. The material is crushed to a small degree. During the operation, the powder is easy to fly out.

Its working method is mainly completed by slapping and crushing, which will increase the amount of dust. The impact plate will be worn after long-term impact. What's more, the impact plate surface will fall off, which will cause the sealing of the impact crusher to be *ly reduced and aggravate dust pollution.

There are many situations that cause stone powder to fly when the impact crusher is working. In addition to the large amount of airflow brought out by the rotation of the rotor, which causes the stone powder to fly out, the crushed materials are mainly completed through multi-stage crushing and grinding in the crushing chamber. The fineness of the material is small, and the powder can easily fly out during operation. In addition, its working method is mainly completed by slapping and crushing, which will increase the amount of dust, and the impact plate will be worn after long-term impact. What's more, the impact plate surface will fall off, which will cause the sealing of the impact crusher to be *ly reduced and aggravate dust pollution.

In order to solve the problem of excessive stone powder in the work of the impact crusher, we have thought of many solutions, such as equipping the club with additional dust removal equipment, and adding a closed cover to prevent dust from flying. When using, users can also add a small amount of water to wet the material before entering the feed port of the impact crusher or directly add a dust removal humidifier to work together. These measures can well solve the problem of dust flying when the impact crusher is working.