What are the methods to prevent cone crusher failure?

What are the methods to prevent cone crusher failure:

1. Regularly check the lubrication system: Regularly check the operation of the thin oil lubrication station, filter, cooler, etc., as well as the oil pressure and oil temperature of the oil and thin oil lubrication system.

2. Install iron removers, metal detectors and video monitoring systems in advance to remove non-crushable items in time before entering the crusher.

3. Regularly check the gear clearance and replace the eccentric sleeve and frame bushing with excessive wear in time.

4. Regularly check the thickness of the thrust plate and adjust the meshing clearance of the large and small cone wheels in time.

5. Regularly check the dustproof device to prevent a large amount of dust from entering the lubricating oil and causing an impact. If it occurs, s* the machine for inspection and replace it in time.

6. The electronic control system is equipped with an overcurrent protection function. When the crusher enters a foreign object that is not easy to crush, the motor automatically s*s running for protection.

7. The crusher should pay attention to uniform feeding to prevent blockage.

8. Check the wear of the spherical bearing regularly and replace the worn spherical bearing in time.

9. Check the wear of the liner regularly and tighten and replace it in time.

10. The operator must comply with the marking operation procedures specified in the crusher startup and shutdown procedures.