Main Features of Cone Crusher

1. The moving cone rotates continuously, and the crushing process and unloading process of materials are carried out alternately and continuously along the working face, with high productivity.



2. The material is sandwiched between the two cones and subjected to extrusion, bending and shearing, so it is easier to break and the power consumption is lower.

3. The product size of the cone crusher is relatively uniform, in the shape of a cube, and the wear of the working surface of the moving cone is also relatively uniform.

4. Introduction to the structure of the cone crusher. The structure of the cone crusher mainly includes the frame, horizontal shaft, moving cone, balance wheel, eccentric sleeve, upper crushing wall (fixed cone), lower crushing wall (moving cone), hydraulic coupling, etc. It consists of device, lubrication system, hydraulic system, control system and other parts.



5. Both the moving cone and the fixed cone are upright. When the movable cone swings, there is a parallel belt with equal gap between the movable cone and the fixed cone near the discharge opening of the crushing chamber, so that the finished products are evenly distributed. The size of the feed port is small, and all the materials that can be processed are the materials that have been crushed for the * time.

6. This series of cone crushers adopts two sealing methods of dry oil or water, so that dust and impurities cannot enter the body, thus ensuring the cleanliness of lubricating oil, prolonging the service life of sliding bearings and thrust ball bearings, and making the machine run reliable.