What should be paid attention to when operating a cone crusher

　　Cone crusher is suitable for ores and rocks with medium and above hardness, and has the characteristics of reliable structure, high production efficiency, convenient adjustment and economical use. Due to its harsh use environment, large dust, and inadequate maintenance of some users, various problems often occur during operation. Generally speaking, cone crushers should pay attention to the following problems during operation to ensure the normal operation of the machine. run.

　　1. Personnel should be assigned to be responsible for the operation of the equipment, and the equipment operators are required to operate in strict accordance with the operating procedures.

　　2. The cone crusher has strict feeding particle size, which should strictly follow the particle size specified in the model parameter table. The feed amount is 85%.

　　3. Strict inspection should be carried out before feeding to prevent metal, rough and hard debris from mixing and damaging the equipment. If conditions permit, it is recommended to install iron removal device before the feeder.

　　4. The correct feeding condition is that the ore is evenly dispersed in the crushing cavity through the distribution plate, and the feeding material cannot be higher than the height of the mortar wall.

　　5. The moisture content of the material should not be *er than 15%, so as not to block the feeding port and paste the machine.

　　6. In actual production, due to the change of raw material sources, different hardness, moisture and composition of sand and gravel materials will lead to different yield and fineness distribution. Therefore, the parameters should be retuned to optimize their combination. Do not deliberately pursue full load operation of the host current in order to obtain high output.

　　7. During the operation of the equipment, maintain the balance of incoming and outgoing materials, keep the rated current of the host stable, and do not change from large to small.

　　8. Check the fineness of the crushed products, which should be carried out under the normal operation of the equipment.

　　9. The cone crusher is mainly suitable for crushing brittle and medium and high hardness materials.