Reasons that affect the particle size and shape of the cone crusher

Cone crushers are * in the crushing field for their high crushing power and *finished product shape. In actual production, there are many factors that affect the quality of the finished product. We can take appropriate adjustment methods based on these factors. First of all, let us * understand the influencing factors of the size and shape of the cone crusher product, which can be summarized into four aspects: the nature of the material, the size of the feed, the speed of the eccentric shaft, and the size of the discharge opening.

1, The nature of the material. It mainly includes the hardness, humidity, grindability and physical and chemical properties of the material. The *er the hardness and the higher the grindability of the material, the more difficult it is to break, and the material with high humidity is easy to bond, which is not conducive to the improvement of product quality. Cone crusher can crush various ore rocks with medium and fine crushing pressure below 350 MPa.

2, Feeding size. When the feed size is too large, the work load of the crusher will be overloaded, which will not only fail to fully crush the materials, but also easily cause equipment failures, the materials will not be fully crushed, and the discharging granularity will become larger and uneven. 3, Rotation speed of eccentric shaft. Appropriately increasing the speed of the eccentric shaft of the crusher can improve the crushing efficiency and the fineness of the finished product, and reduce the needle-like particles in the finished material. Fourth, the size of the discharge opening.

This is the direct factor that determines the particle size of the cone crusher. With a large discharge opening, the particle size of the finished product is naturally large. However, the size of the discharge opening is adjusted based on the production requirements.