Analysis of Causes of Material Blocking in Sand Making Machine

The sand making machine can be used to process granite, pebbles, quartz stone and other materials. After these materials are processed, they are a very suitable material for roads, railways and other fields. Jiaozuo Zhongxin Heavy Industry wants to remind everyone that the sand making machine How to reduce the clogging problem of the sand making machine that may occur during use?
 
 The blockage of the sand making machine may be due to the feed speed being too fast. When the feeding speed is too fast, the load of the sand making machine will increase, and the materials that cannot be processed in time will be slow or even discharged, which will block the material. In this case, please always pay attention to the feeding speed and the pointer of the sand making machine ammeter. When the feed volume is large, the current flow indicator of the sand making machine will be too large. When the rated current of the device is exceeded, it will cause an overload. In this case, the working time is too long, which may cause the motor to block or even burn the equipment.
 

When this happens, on the one hand, the feed speed should be reduced immediately, and it can be adjusted by adjusting the feed device. Therefore, when choosing equipment, you must choose the right equipment to ensure that the sand making machine can ensure safe and effective work in the production process.
 
The problem that causes slow discharge or blockage of the sand making machine is that the vent is blocked. This situation may be caused by a failure of the corresponding conveying device. If you find a problem, please clean the vent * and replace it in time. Corresponding conveying equipment, adjust equipment, realize reasonable cooperation, and ensure the normal and stable operation of the sand making machine during work.