Vibration feeder is the orderly and stable supply of materials in the production line of equipment, if the feeder appears to block or not feeding the case, then the vibration feeder in the entire production line will lose its significance, and But also a direct impact on the entire production line production schedule.
Vibration feeder in the use of the process, we should also be noted that the load of the hopper can not be directly pressed in the feeder chute, so long will lead to the spring plate and connecting fork fatigue damage occurred, * to one of the fracture . Feeding too much cause the material in the base of the accumulation, or transport capacity increase spiral conveyor, hopper caused by poor operation, encountered this situation should be less feed and keep the feed evenly.
The gap between the feeder core and the armature is too large or too small, if this happens, the machine will not reach the normal amplitude of the feeder to feed. May be due to the various parts of the feeder between the incompatibility caused by these parts is mainly due to the loosening of parts. This requires adjustment of the tuning of the components, the machine spring plate compression bolts to adjust the degree of compression to the *, so that the chute production to achieve the required amplitude range.
Although the vibration feeder in the production line is not the * important equipment, but it has a significant role can not be ignored. Therefore, we should always check the status of vibration feeder equipment, regular inspection and maintenance, reduce equipment failure rate.
Home
Products
Case
News
About us
Service
Contact us
