How to solve the problem of large loss of sand making machine

The sand making machine needs to crush and reshape materials during the production process. We cannot prevent its wear during the production process, but we can take corresponding measures to reduce the wear and tear of the sand making machine wear parts during the production process. Thereby prolonging the service life of the wear parts of the sand making machine and making it play an outstanding production effect. The following is a specific introduction.

1. As the saying goes, if a worker wants to do his job well, he must * sharpen his tools. If we want to reduce the wear and tear of the wear parts of the sand making machine and make it play a better production effect, we need to do it before the production of the sand making machine. Careful inspection of each wear-resistant part, and regular maintenance, can correspondingly extend the service time of the wear-resistant parts of the sand making machine, extend the replacement cycle of the wear-resistant parts of the sand making machine, and save the production cost for users.

2. In the production process of the sand making machine, it is necessary to prevent slight failures, always pay attention to the working condition of the sand making machine, and regularly check the wear condition of each wear part. If the wear is found, it should be corrected and replaced in time. Don't try to reduce repair costs. Neglect to correct and replace the wear parts of the sand making machine to prevent small losses.

3. When replacing wear-resistant parts, go to the original manufacturer to purchase. You can't be greedy for cheap, so you can buy inferior wear-resistant parts. In this way, not only the quality of the wear-resistant parts cannot be guaranteed, but also it is easy to form a sand making machine The phenomenon of mismatch, this will not only save us money, but also bring us unnecessary loss.

4. The sand making machine is suitable for the crushing operation of materials with medium and low hardness. Different types of sand making machines also have corresponding requirements for the feed size of the materials. Therefore, we must strictly follow the sand making machine's production process. Feeding requires production to prevent excessive wear of wear parts of the sand making machine.

5. An important reason for the loss of wear parts of sand making machines in the production process is the lack of smoothness, so we must add smooth grease regularly to ensure that the wear parts of sand making machines are in an outstanding smooth condition, thereby reducing production Conflicts in the process to achieve the purpose of reducing losses.