Jaw crusher feeds uniformly to improve production efficiency

Jaw crusher is the initial stage of crushing. Feeding has an extremely important impact on the production capacity of jaw crusher. If the jaw crusher makes a mistake, the efficiency of the entire crushing process will decrease.

Strictly control the feed size; the so-called feed size is the size of the material. The jaw crusher is frequently blocked, and the raw material exceeding the specified large particle size becomes one of the culprits for blocking the cavity. Therefore, the operator must strictly control the size of the material, which is one of the * important prerequisites to ensure the normal operation of the jaw crusher.

Strictly control the feeding amount; many users have carried out technical transformations to the silo because the initial feeding is too small and the production efficiency is low. However, the silo after the transformation has no equipment to restrict the feeding amount, and it is very easy to form an excess The feeding condition. Since the working principle of the jaw crusher is in the form of swinging back and forth, if too much material is put in, the material will be too late to be broken. Moreover, the crushed materials cannot be cleaned up in time, resulting in material jams. Therefore, untimely feeding and excessive feeding will affect the production capacity of the jaw crusher.

Feed evenly and control the feeding; during the operation of the stone production line, keep the feeding uniform and control the feeding speed. The feed inlet of the jaw crusher is inclined. If it is not uniform, it is easy to cause uneven crushing of the crusher, and then blockage, which is more likely to wear the jaw crusher. Moreover, it is strictly forbidden to feed the material straight to avoid pressure on the jaw crusher, reduce the crushing power and lose the ability to oscillate or affect the transport function.