Precautions for daily use of cone crusher

The cone crusher has the advantages of high output and long life. It can process a variety of materials with higher hardness. All equipment is inseparable from daily maintenance and correct operation methods. We only need to pay attention to the following details to extend the cone crusher Life.

1. The ore must be distributed in the middle of the tray during the processing operation of the crusher. In order to prevent the crusher from being overloaded, the lining plate will be unevenly worn; it is not allowed to directly load the ore into the crushing cavity. The correct feeding conditions are: the ore is evenly dispersed in the crushing cavity through the distribution plate, and the fed ore cannot be higher than the level of the rolling mortar wall.

2. The relatively large feed ore size is less than or equal to 85% of the feed ore size, otherwise it will lead to a reduction in the crusher output and damage to some components.

3. Do not start under load to avoid accidents.

4. When s*ping, the feeder must be s*ped *, and after the ore that has entered the crushing chamber is crushed and discharged, the crusher must be s*ped.

5. When the crusher is working, always check the pressure of the locking system and the working condition of the hydraulic station, and deal with it in time after finding the problem.