How to adjust the outlet of jaw crusher

Jaw crusher is a rough crushing device, mainly used for crushing stone and ore, such as river pebbles, pebbles, granite. Jaw crusher* appeared early in 1858. It was * widely used in road construction and later in mines. It can now be used for medium-sized crushing of various ores and bulk materials. The highest compressive strength of the crushed material is 320MPa. The jaw crusher also has the characteristics of large crushing rate, uniform product size, simple structure, reliable operation, simple maintenance, and low operating cost.

    When the jaw crusher is working, the motor is used as power. The eccentric shaft is driven by a V-belt and a pulley through a motor pulley, so that the movable cymbal reciprocates according to a predetermined trajectory, and enters a fixed raft, a movable raft, and side guards. The material in the crushing chamber composed of plates is broken, and the finished material is discharged through the lower discharge port. The discharge port (discharge port) can be adjusted according to user needs to obtain qualified product material size. Different materials purchased by customers, different materials and crushing particles of crushers are also different. So how to adjust the output particle size?

    1. By adjusting the tension spring and adjusting the rear wedge, adjust the two wedges between the back seat of the thrust plate and the frame to control the size of the particles. This method is suitable for small crushers.

    2. Adjust the washers, that is, place a set of washers between the rear of the support base of the rear thrust plate and the rear wall of the frame. By increasing or decreasing the number of gaskets or changing the thickness, the purpose of adjusting the discharge port can be achieved.