How to solve the dust problem of impact crusher

With the development of the construction industry, crushing equipment that provides high-quality sand and gravel for the construction industry has been widely used. The use of crushers has *ly promoted the development of the construction industry. Impact crusher has been widely used in the crushing industry due to its high crushing efficiency, convenient maintenance and low cost. However, due to the large impact force between it and the stone during the crushing process, a large amount of dust will be generated during the crushing process, causing a certain amount of environmental pollution. So how did this dust come about and how to fix it.

First of all, the dust generated during the crushing process is inevitable. Second, the impact crusher has a long working time. After a long period of work, the impact plate and hammer head will wear a certain amount, and even the hammer head will break. The wear of the wearing parts will make the impact seal worse, resulting in a large Small particles of powder fly out. Third, the crushing material is mainly completed by multi-stage crushing in the crushing cavity, the material fineness is small, and the powder particles are easy to fly outward during operation, generating dust.

After explaining the causes of dust, Jiaozuo Zhongxin will tell you some ways to deal with dust during the crushing process:
1. Clean up the dust in time to avoid re-pollution caused by secondary dust.
2. For the crusher, the sealing cover can be used in the place where the amount of powder produced by the crusher is large, and the part with a large amount of powder can also be sealed in the entire small environment of the crusher.
3. Ensure the humidity of the material and reduce the dust without affecting the crushing.
4. Install an exhaust system to store the airflow in the local dust environment to reduce dust.