How to make the crusher go through the cold winter

As the saying goes, "19, 29 will not be shot, 39, 49 will go on ice." Winter is here. People are wearing thick cotton clothes. In fact, the crusher is also afraid of cold. Yes, the following editor will tell you how to make your crusher survive the winter.

First, the cleaning of the crusher
In the winter season, the cleaning work of the crusher can not be lazy. It is necessary to regularly clean the components of the crusher's chassis, working equipment and other parts. You can also check whether the parts are intact while removing the dirt.

Selection and replacement of oil
In the case of temperature comparison, the oil of the crusher is easy to wax, and the flow * is not good, resulting in incomplete combustion and reducing the power of the machine. At this time, it is recommended to use diesel with a lower freezing point and replace the lubricating oil and grease.

Third, the maintenance of the crusher parts
When maintaining the cooling system of the diesel engine, the working state of the ther*at needs to be checked. Once mud and sand are found in the water tank, it must be removed immediately. In addition, the battery must be recharged frequently to maintain the preheating device.

In addition to the above points, it is also necessary to constantly check whether the brake fluid is sufficient. For harsh environments, s* production or choose a relatively warm place.
Jaw crusher, impact crusher, cone crusher and other crushing equipment will not only reduce their service life in the low temperature environment, but also may freeze the water and oil in the crusher. Therefore, it is often checked in winter. Necessary.