What are the taboos for sander maintenance?

The maintenance of the sand making machine is always a problem that plagues many manufacturers. How to maintain the life of the sand making machine and ensure the output of the equipment is not the maintenance method that we said in the article, but some maintenance methods. It may not be right, here Jiaozuo Zhongxin technical engineer corrects for everyone, introduces the maintenance taboo.

Taboo 1: The weather is dry in summer, many users choose to cool the sand making machine, and use a cool water to make a cold water bath for the sand making machine. This is OK, but the sand making machine manufacturer reminds the user to pay attention to the drying effect after cleaning. Otherwise, it is prone to rust in summer.

Taboo 2: The cylinder gap measurement is not allowed. If the measurement is not accurate, it is easy to cause the piston skirt to be perpendicular to the pin hole of the piston due to the lateral pressure, so it is better not to measure the cylinder gap during use.

Taboo 3: Maintenance. The instructions must be described on the regular lubrication of the parts, which means that * customers will regularly add lubricants when they use them, but often we just add the lubricant, but ignore the cleaning, if only add the lubricant and not clean, long Time accumulation can also cause damage to mechanical equipment.