How to solve the problem that the cone crusher is difficult to adjust the discharge opening

Most of the cone crusher upgrades focus on the production characteristics, but in fact the technology of adjusting the discharge port is also very important, because the cone crusher is relatively large, and we may need different particle size materials in actual production. If the discharge port is not well adjusted, it will be very time consuming. How to upgrade can make this work easier.

The cone crusher has high output and high efficiency. It is a "star" product in the industry, and the whole use is wear-resistant materials. The internal wearing parts are also equipped with protective devices, which makes the overall life of the cone crusher increase a lot. And the scope of material processing has also increased a lot, but the work of adjusting the discharge opening has made many customers guilty. Let us understand how the traditional cone breaking regulates the discharge opening.

Firstly, the cone crusher should be s*ped and then manually adjusted, mainly by adjusting the height of the fixed cone liner by means of the zigzag thread between the adjusting ring and the support sleeve. After the adjustment work is completed, the wire shot can be used to detect the size of the discharge port at the crushing chamber to the discharge port. After the discharge port is of the appropriate size, the lock ring is locked by the lock cylinder, and the production is restarted.

Jiaozuo Zhongxin's hydraulic cone crusher. When the machine is working, the motor drives the large bevel gear at the bottom of the eccentric sleeve through the fluid coupling and the small bevel gear to rotate the eccentric sleeve, causing the cone to swing and break the material. It is convenient and time-saving, and it solves the problem of adjusting the discharge opening *ly.